Mitee-Bite Products · Cam Action
Mitee-Bite Knife Edge Clamp
A hardened, nickel-coated 12L14 steel alternative to the brass hex washer for gripping rough-cut stock, castings and other hard-to-hold material.
- Same G dimension as the original Fixture Clamp
- Bites into rough stock and castings
Mitee-Bite Knife Edge Clamp part numbers & specifications
22 part numbers with dimensions, screw sizes, torque and holding force from the Mitee-Bite catalog (page 4). Dimensions are in inches unless marked metric. Scroll the tables sideways on a phone, use your browser’s find (Ctrl+F / Cmd+F) to jump to a number, or tap “Quote” to email us about that part.
| Part Number | Model | A | B | C | D | E | F | G | Max. Torque* (Ft/Lbs) | Holding Force (Lbs) | Number of Clamps Per Pack** | Cam Screw | Replacement Washer | Pricing |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | ||||||||||||||
| 22584 | MB-6 | 3/8 - 16 | 3/16 | .050 | .812 | .250 | .710 | .400 | 16.6 | 2,000 | 8 | 10371 | 12584 | Quote |
| 22588B | MB-8 | 1/2 - 13 | 5/16 | .080 | 1.000 | .375 | .900 | .500 | 52.0 | 4,000 | 8 | 10374 | 12588B | Quote |
| 22592 | MB-10 | 5/8 - 11 | 3/8 | .100 | 1.187 | .500 | 1.125 | .590 | 80.0 | 6,000 | 4 | 10375 | 12592 | Quote |
| Metric — Max. Torque in N.m, Holding Force in N | ||||||||||||||
| 82584 | MB-10M | M10 | 7M | 1.27 | 20.60 | 6.35 | 19.0 | 10.15 | 28.00 | 8900 | 8 | 50369 | 12584 | Quote |
| 82588 | MB-12M | M12 | 8M | 2.03 | 25.40 | 9.52 | 22.8 | 12.70 | 88.00 | 17800 | 8 | 50371 | 12588B | Quote |
| 82592 | MB-16M | M16 | 12M | 2.54 | 30.15 | 12.70 | 28.5 | 15.00 | 135.00 | 26700 | 4 | 50373 | 12592 | Quote |
*Maximum torque is not necessary. Normally half that value is sufficient.
Ordering Mitee-Bite Knife Edge Clamp
Small Clamps supplies genuine Mitee-Bite Products Knife Edge Clamp from the Cam Action line. Send us the part numbers and quantities you need and we will reply with pricing and lead time. Not sure which size fits your fixture? Email info@smallclamps.com or call (619) 704-3113 and we will help you pick the right part. Specifications on this page are taken from the current Mitee-Bite catalog; please confirm critical dimensions before machining your fixture.